THERMOMETER
 |
Checktemp With Stainless Steel Penetration Probe
|
Checktemp is destined to make glass thermometers obsolete. Glass thermometers are hazardous to the user and to the environment. The glass contains lead and the measurement media is either mercury or alcohol. These materials are undesirable in today's workplace. The comparative chart below clearly shows that a Checktemp thermometer is the wisest choice for your routine temperature measurements.
Checktemp is an all-in-one unit that combines a probe and a meter. The probe is an NTC thermistor, housed in a stainless steel shaft. The shaft has a pointed tip for easy penetration in frozen or semi-solid materials. Checktemp provides highly accurate temperature measurements in a very short period of time.
World's First Calibration Check Feature The users of glass thermometers do not worry about the accuracy of their thermometers because the method of measurement is physical liquid expansion. The largest problem associated with electronic thermometers is the stability of the circuitry that measures the temperature. For this reason users are hesitant to trust electronic thermometers. To overcome this, a calibration test device has been incorporated into the meter. At the touch of a button Checktemp displays 32.0°F ± 0.5 (0.0°C ± 0.3). This assures the user that the reading is reliable and accurate.
Factory Calibration Certificates If you require your thermometer to be calibrated against an NIST standard, add an "N" to the end of the code when ordering.
Theoretical Checktemp
Temperature Reading
(°F) (°C) (°F) (°C)
-22.0 -30.0 -21.5 -29.7
-4.0 -20.0 -3.8 -19.9
+14.0 -10.0 +14.2 -9.9
+32.0 0.0 +32.0 0.0
+50.0 +10.0 +49.8 +9.9
+68.0 +20.0 +68.2 +20.1
+86.0 +30.0 +86.0 +30.0
+122.0 +50.0 +122.4 +50.2
+140.0 +60.0 +140.2 +60.1
+194 +90.0 +193.6 +89.8
+212 +100.0 +211 +99.6
+248 +120.0 +248 +119.8
+284 +140.0 +283 +139.7
+302 +150.0 +301 +149.4
Range:
Checktemp F -58.0 to +302°F
Checktemp C -50.0 to +150.0°C
Resolution:
Checktemp F 0.1°F (-58.0 to 199.9°F); 1°F (200 to 302°F)
Checktemp C 0.1°C
Accuracy:
Checktemp F ±0.5°F (-4 to +194°F); ±1°F (-58 to -4 & +195 to 302°F)
Checktemp C ±0.3°C (-20 to +90°C); ±0.5°C (-50 to -20 & +91 to +150°C)
Battery: 1 x 1.4 volt battery
Battery Life: 3000 hours of continuous use
Environment: 32 to 122°F (0 to 50°C)
Dimensions: 2.6 x 2.0 x 1" (66 x 50 x 25 mm)
Weight: 1.8 oz. (50 g)
Probe: Stainless Steel, 105 X 3mm with a protective cap
 |
Checktemp 1 With Remote Stainless Steel Probe
|
Checktemp 1
Environment Friendly Checktemp 1 is destined to make glass thermometers obsolete. Glass thermometers are hazardous to the user and to the environment. The glass contains lead and the measurement media is either mercury or alcohol. These materials are undesirable in today's workplace. The comparative chart below clearly shows that a Checktemp 1 thermometer is the wisest choice for your routine temperature measurements. Checktemp 1 is a high accuracy thermometer with a 3.3' (1 meter) cable between the meter and the probe. The stainless steel probe is perfect for fast response in liquids, air, frozen and semi-solid materials. The probe utilizes a high-tech NTC thermistor sensor to measure the temperature. Thermistors make it possible to obtain extremely high accuracy in a very short period of time. Checktemp 1 is available in °C and °F versions.
World's First Calibration Check Feature
Glass thermometers users do not worry about their thermometers' accuracy because the method of measurement is physical liquid expansion. The largest problem associated with electronic thermometers is the stability of the circuitry that measures the temperature. For this reason users are hesitant to trust electronic thermometers. To overcome this, a calibration test device has been incorporated into the meter so that at the touch of a button Checktemp 1 displays 32.0°F ± 0.5 (0.0°C ± 0.3). This assures the user that the reading is reliable and accurate.
Factory Calibration Certificates If you require your thermometer to be calibrated against an NIST standard, add an "N" to the end of the code when ordering.
Theoretical Checktemp
Temperature Reading
(°F) (°C) (°F) (°C)
-22.0 -30.0 -21.5 -29.7
-4.0 -20.0 -3.8 -19.9
+14.0 -10.0 +14.2 -9.9
+32.0 0.0 +32.0 0.0
+50.0 +10.0 +49.8 +9.9
+68.0 +20.0 +68.2 +20.1
+86.0 +30.0 +86.0 +30.0
+122.0 +50.0 +122.4 +50.2
+140.0 +60.0 +140.2 +60.1
+194 +90.0 +193.6 +89.8
+212 +100.0 +211 +99.6
+248 +120.0 +248 +119.8
+284 +140.0 +283 +139.7
+302 +150.0 +301 +149.4
Range: Checktemp 1 F -58.0 to +302°F Checktemp 1 C -50.0 to +150.0°C Resolution: Checktemp 1 F 0.1°F (-58.0 to 199.9°F); 1°F (200 to 302°F) Checktemp 1 C 0.1°C Accuracy: Checktemp 1 F ±0.5°F (-4 to +194°F); ±1°F (-58 to -4 & +195 to 302°F) Checktemp 1 C ±0.3°C (-20 to +90°C); ±0.5°C (-50 to -20 & +91 to +150°C) Battery: 1 x 1.4 volt battery Battery Life: 3000 hours of continuous use Environment: 32 to 122°F (0 to 50°C) Dimensions: 4.2 x 2.2 x 0.7" (66 x 50 x 25 mm) Weight: 2.8 oz. (80 g) Probe: Stainless Steel, 160 X 3mm with 3.3' (1 meter) cable
 |
CHECKTEMP 2-Environment Friendly With Folding Teflon® Coated Probe
|
Checktemp 2 is destined to make glass thermometers obsolete. Glass thermometers are hazardous to the user and to the environment. The glass contains lead and the measurement media is either mercury or alcohol. These materials are undesirable in today's workplace. The comparative chart below clearly shows that a Checktemp 1 thermometer is the wisest choice for your routine temperature measurements.
Checktemp 2 is a high accuracy thermometer with a Teflon® coated, folding 110mm long probe. The folding probe allows multiple angles for measurement in difficult places. The Teflon® coating enables Checktemp 2 to stand up to the harmful effects of chemicals. The probe utilizes a high-tech NTC thermistor sensor to measure the temperature. Thermistors make it possible to obtain extremely high accuracy in a very short period of time. Checktemp 2 is available in °C and °F models.
World's First Calibration Check Feature
Glass thermometer users do not worry about their thermometers' accuracy because the method of measurement is physical liquid expansion. The largest problem associated with electronic thermometers is the stability of the circuitry that measures the temperature. For this reason users are hesitant to trust electronic thermometers. To overcome this, a calibration test device has been incorporated into the meter. At the touch of a button Checktemp 2 displays 32.0°F ± 0.5 (0.0°C ± 0.3). This assures the user that the reading is reliable and accurate.
Factory Calibration Certificates
If you require your thermometer to be calibrated against an NIST standard, add an "N" to the end of the code when ordering.
Checktemp 2 C/N = Meter with Factory Calibration Certificate
Checktemp 2 F/N = Meter with Factory Calibration Certificate
Theoretical Checktemp
Temperature Reading
(°F) (°C) (°F) (°C)
-22.0 -30.0 -21.5 -29.7
-4.0 -20.0 -3.8 -19.9
+14.0 -10.0 +14.2 -9.9
+32.0 0.0 +32.0 0.0
+50.0 +10.0 +49.8 +9.9
+68.0 +20.0 +68.2 +20.1
+86.0 +30.0 +86.0 +30.0
+122.0 +50.0 +122.4 +50.2
+140.0 +60.0 +140.2 +60.1
+194 +90.0 +193.6 +89.8
+212 +100.0 +211 +99.6
+248 +120.0 +248 +119.8
+284 +140.0 +283 +139.7
+302 +150.0 +301 +149.4
Checktemp 2C
Range: -50.0 to +150.0°C
Resolution: 0.1°C
Accuracy: ±0.3°C (-20 to +90°C)
±0.5°C (-50 to -20°C & +91 to +150°C)
Checktemp 2F
Range: -58.0 to +302°F
Resolution: 0.1°F (-58.0 to 199.9°F)
1°F (200 to 302°F)
Accuracy: ±0.5°F (-4 to +194°F)
±1°F (-58 to -4 & +195 to 302°F)
Environment Temp.: 32 to 122°F (0 to 50°C)
Battery: 4 x 1.4 Volts
Battery Life: 3,000 hours of continuous use
Weight: 2.1 oz.(60 g)
Probe: Folding Teflon® coated, 110mm x 3mm diameter
Teflon® is registered trademark of "du Pont de Nemours & Co."
 |
KEY®-Thermocouple Pocket Thermometer
|
KEY® is a K-type thermocouple thermometer that combines the meter with the probe for quick on-the-spot measurement of temperature. With a response time of less than 20 seconds in water, KEY® is ideal for quality control and routine industrial temperature monitoring. There are 4 temperature probes available to meet your specific requirements. In the HVAC field, gas and air can be monitored with the 'C' probe. The 'M' probe is perfect for machine shops, molding facilities and welding surfaces. Probe 'P' is for penetration when you need the very fast response typical of a thermocouple probe. The 'L' probe is for general liquid monitoring. Each probe is made of a rugged AISI 316 stainless steel shaft that resists the harmful effects of chemicals and high temperature.KEY® is supplied complete with probe L, 3 x 1.4V batteries and instructions.
KEY® C KEY® F Range: -40°C to +550°C -40°F to +999°F Resolution: 1°C 1°F Accuracy: ±2°C ±4°F Battery: 3 x 1.4 Volts Battery Life: 700 hours of continuous use Environment Temp.: 32 to 122°F (0 to 50°C) Weight: 2.8 oz.(80 g) Dimensions: 5.6 x 1.2 x 0.6"(142 x 29 x 15mm)
 |
EDEN Thermocouple Pocket Thermometer with Remote ProbeAvailable Probes:
|
EDEN is a pocket thermometer using a K-type thermocouple probe with a 3.3' (1 meter) cable. With a response time of less than 20 seconds in water, EDEN is the ideal tool for all high temperature applications where extreme accuracy is not necessary. If your temperature range does not exceed 1200°F (650°C) and does not require high accuracy, there is no need to purchase an expensive thermometer. There are 4 interchangeable temperature probes available to meet your specific requirements. In the HVAC field, gas and air can be monitored with the 'EC' probe. The 'EM' probe is perfect for machine shops and molding facilities. Probe 'EP' is for penetration when you need the fast response typical of a thermocouple probe. The 'EL' probe is for general liquid monitoring. Each probe is made of a rugged AISI 316 stainless steel shaft that resists the harmful effects of chemicals and high temperature.
Eden F Eden C Range: -40°F to +1200°F -40°C to +650°C Resolution: 1°F 1°C Accuracy: ±4°F ±2°C Battery Type: 4 x 1.4V batteries Battery Life: 700 hours of continuous use Environment: 32 to 122°F (0 to 50°C) Dimensions: 5.9 x 1.2 x 0.9" (150 x 30 x 24 mm) Weight: 3.0 oz. (85 g) Response Time: Approx. 20 seconds in water (probe EL)
BRAVO® Electronic Thermometer |
||
 |
|
|
BRAVO® is a simple, lightweight tester with a stainless steel penetration probe able to test air, liquid, semi-solids and solid material in deep-freeze applications. With an accuracy of ±0.2°C (available also in °F), it is one of the most accurate thermometers in its class. BRAVO® is pocket-sized and built in sturdy plastic and can be used in practically any field. BRAVO® is available with a flat tip (BRAVO® FLAT) for general applications or a sharp tip (BRAVO® SHARP) for penetration applications.
BRAVO® F BRAVO® F FT BRAVO® C BRAVO® C FT
Tip Shape: Sharp Flat Sharp Flat
Range: -40°F to +212°F -40°C to +99°C
Resolution: 1°F 1°C
Accuracy: ±1°F ±0.2°C (-20 to +99.9°C)
±0.4°C (-40 to -30°C)
Battery Type: 3 x 1.4V batteries
Battery Life: 1000 hours of continuous use
Environment: 32 to 122°F (0 to 50°C)
Dimensions: 7.4 x 1.2 x 0.6" (188 x 29 x 15 mm)
Weight: 2.1 oz. (60 g)
 |
ElTh® WATERPROOF-Electronic Thermometer for the Field
|
ElTh® WP is the first pocket-sized waterproof thermometer ever offered. The housing has been constructed to provide excellent protection against the harshest of environments. With a measurement range of -50 to +170°C or -58 to +338°F and an accuracy of ±1°C or ±2°F, ElTh® WP is perfect for use in greenhouses, hydroponics, and fish farming. Being water resistant, moisture and dust do not affect the circuitry of this meter, even in harsh industrial applications or in accidental spills. The simple-to-use design is ideal for even non-technical operators. Due to its rugged construction, this thermometer does not need to be handled with extreme care like conventional glass thermometers. The probe is constructed of stainless steel that will resist the harmful effects of most chemicals used in industry. ElTh® WP can also be easily calibrated through a trimmer located on the back of the unit to guarantee accuracy time after time.
ElTh® WP C ElTh® WP F
Range: -50 to +170°C -58 to +338°F
Resolution: 1°C 1°F
Accuracy: ±1°C ±1°F (-58 to +266°F)
±2°F (+267 to +338°F)
Battery: 4 x 1.4 Volts
Battery Life: 700 hours of continuous use
Environment Temp.: 32 to 122°F (0 to 50°C)
Weight: 2.8 oz.(80 g)
Dimensions: 5.6 x 1.2 x 0.6"(142 x 29 x 15 mm)
Probe: 130mm L x 3mm diameter (stainless steel)
 |
HI 9000 A Small Thermometer that Goes a Long Way
|
HI 9000 is a truly pocket-sized thermometer, measuring less than 12cm (5") from head to toe! Notwithstanding its modest demeanor, HI 9000 has a potent microprocessor inside that delivers ±0.5°C accuracy over an extensive range from -20 to +100°C. HI 9000 is so simple-to-use that it has literally no buttons to push or keys to press! Simply insert the battery and go. The battery life is in the thousands of hours and once the battery is inserted, HI 9000 will run for months. A penetration probe makes for easy measurement in liquid applications as well as foodstuff and semisolid material. A protective cap covers the probe and makes the unit portable in large or small pockets. An eye is molded into the casing so that it can be hung next to utensils in a kitchen, canteen, or wherever it is most needed.
HI 9000 Stick Celsius thermometer comes complete with 1x1.4V battery and protective cap.
| Specifications: | HI 9000 |
| Range | -20.0 to 100.0°C |
| Resolution | 0.1°C |
| Accuracy | ±0.5°C |
| Typical EMC Deviation | ±0.1°C |
| Tip Shape | Sharp |
| Protective Cap | Included |
| Battery Type / Life | 1 x 1.4V / approx 9 months of continuous use |
| Environment | 0 to 50°C (32 to 122°F); max. RH 95% non-condensing |
| Dimensions | 7.9 x 1.1 x 0.8" (200 x 28 x 20 mm) |
| Weight | 1.6 oz. (46 g) |
