AMETEK Pressure Calibrators
Back to Ametek

	DIGITAL PRESSURE CALIBRATORS Calibrators for easy, traceable, field calibration of pressure gauges, transducers, transmitters, pressure switches, safety valves, fuel nozzles, etc. Portable and self-contained precision instruments designed for critical process applications.
APC | CPC | EPC 2000 | EPM

JOFRA APC PRESSURE CALIBRATION SYSTEMS Precision pressure calibrators for easy, traceable, field calibration of pressure gauges
	The JOFRA APC is an extremely accurate handheld pressure calibrator that offers several user-friendly features and superior performance. The APC is available as an indicator or in one of 6 test-ready systems that are complete and equipped to meet your pressure calibration needs, where accuracy, flexibility, and quality cannot be compromised.
Large digits display the pressure, icons show current status and mode, and smaller digits show device-under-test conditions. Save time and effort in calculating the error between the APC and the device-under-test by entering the pressure range corresponding to 4-20 mA. This gives immediate read-out of the error in %. You can also just read mA or % of 4-20 mA in the display. Keep the high accuracy: ZERO the instrument with the single button zeroing before every test. Store peak values (upper and lower). Read the highest and lowest presure value since your last reset of the APC. Shutoff feature that extends battery life. Available in 8 different pressure ranges from -12 psi (-0.850 bar) vacuum to 10,000 psi (700 bar). Instant conversion of pressure readings to 17 different units of measure, e.g. bar, kPa, mPa, Atm, kgf/cm2, cmH2O, mmHg, psi, inH2O, inHg, ftH2O. Perform semi-automatic pressure switch tests. The APC records the "close" and "open" pressure values and calculates the hysteresis (deadband). You can change the pressure and the APC does the rest.
Return To Top

Click Here For A Quote

JOFRA CPC PRESSURE CALIBRATION SYSTEMS Portable, traceable, field instrument for easy and reliable check and calibration of pressure
	Use the CPC series in process control applications such as verification or calibration of pressure gauges, transducers, transmitters, pressure switches and safety valves. The JOFRA CPC are portable, self-contained precision instruments delivered as complete ready to use systems or as a stand alone indicator.
Easy-to-read dual line LCD display that indicates pressure and mA (loop signals) and percent of full scale simultaneously. Store peak values (upper and lower). Single button zeroing. Shutoff feature that extends battery life. Available in 3 different pressure ranges from vacuum to 200 psi / 15 bar. Instant conversion of pressure readings to 17 different engineering units of measure, e.g. psi, bar, mbar, kPa, Kg/cm2, cmH2O, mH2O, inH2O, ftH2O, mmHg, inHg. input for mA (0-24 mA). Pressure switch test indicates opening or closing point. CPC accuracy of ±0.05% of full scale.
Return To Top

Click Here For A Quote

AMETEK EPC 2000 PRESSURE CALIBRATOR The high performance intrinsically safe "digital deadweight tester"
	The AMETEK EPC 2000 electronic pressure calibrator is the most accurate digital instrument provided by AMETEK. Combining the accuracy of a laboratory instrument with the functionality and portability of a field calibrator. Ideal for custody transfer and critical process control loops or any application where high accuracy and portability are required. Designed for application flexibility, the rugged, modular design will satisfy your needs for additional pressure ranges. The EPC 2000 calibrator is intrinsically safe, an essential requirement when used in applications on gas pipelines, in refineries, and in chemical plants.
Accuracy ±0.05% of indicated reading including all uncertainties Accuracy including temperature compensation from 0-50°C (32° to 122°F) Rugged case for harsh environments Measures current 0-50 mA Measures voltage 0-50 VDC Includes NIST traceable certificate Intrinsic safety approvals - US and European Pressure switch inputs Selectable engineering units
Return To Top

Click Here For A Quote

AMETEK EPM SERIES - PRESSURE MEASUREMENT SYSTEMS Complete solutions for testing and measurement of pressure
	Based on many years of experience, AMETEK has composed a number of complete solutions for pressure and temperature measurement. These complete kits are delivered in a practical, lightweight carrying case, which is very easy to carry around to the various measuring sites. The configuration eliminates the chance of forgetting probes, tubes, connectors, contact paste, the operating manual or other accessories.
Complete solutions (minimize the risk of errors) Ecomomical pressure test/calibration tool Rugged design including a protective rubber boot Built-in AMETEK quality and features such as efficiency, technical support, and service Big clear display Time saving features: leak rate, freeze display, zero-display, multiple enginering
Return To Top

Click Here For A Quote

	DIGITAL PRESSURE MODULES
	The APM series of pressure modules by JOFRA are compatible with your AMC900, ASC300, or APC calibrators. These units are available in a series of ranges, units, and pressure references. From vacuum to absolute pressure, AMETEK has your application covered with the pressure modules to meet your calibration needs. There are different accuracies, ranges, and references designed to offer you the exact specifications you need for your pressure calibrations.
These rugged modules are engineered for in-plant, field, or laboratory use. They are ready-to-use with the JOFRA calibrators and the protocol allows for immediate recognition and use of the module once it is plugged into the calibrator. If you have pressure instrumentation, these modules are for you. When combined with the JOFRA calibrators, these make for a powerful arsenal of calibration tools. And, you can always add more as your needs change.
Accuracies to 0.01% of FS - Performance to meet most application requirements. Dedicated ranges - Both imperial and metric ranges for worldwide use without conversions. Several pressure references: Gauge, differential, absolute, and vacuum references available. Rugged construction - Engineered for use in the laboratory or in the field. Plug and pressurize - Calibrators recognize range and reference of the modules for ease use. Multiple applications - Use a module with one or more JOFRA calibrators or use one or more modules with one JOFRA calibrator.

	DIAL-GAUGE COMPARATOR TESTERS These testers are economical and easy to use and ideal for applications where high accuracy is not necessary. These systems display the reference pressure using an analog gauge. The pump systems vary according to the pressure range selected from vacuum to 700 bar (10,000 psi).
AMETEK low pressure test kits
	Three models for measuring differential pressure 0-300 inH2O, 0-15 psi, and 0-30 psi.
AMETEK hand held pressure testers
	Pneumatic, hydraulic and vacuum versions. Accuracies to ±0.5% of gauge span. Up to 350 bar (5,000 psi). Metric ranges available.
AMETEK high pressure tester
	Comparator for hydraulic pressure up to 700 bar (10,000 psi). Metric ranges available.
Return To Top

	U-Tubes - LIQUID MANOMETERS U-tube manometers for relative and absolute pressures, vacuum and differential pressures. These devices are primary standards and are void of faults within their physical tolerances. They are designed to measure pressure and are suitable for calibrating high precision pressure sensors.
Applications Very low maintenance cost. No need for recalibration No electronic parts. Can be used anywhere Traceable calibration certificate Ideal for calibration of transmitters in clean-room applications Differential pressure for flow applications Baroscope for absolute pressure in metrology laboratories and aerospace applications Calibration of handheld instruments used in HVAC applications
Return To Top