Action Instruments Limit Alarms
Return To Main Page
Limit Alarms
Signal Conditioners
Two- Wire Transmitters
Limit Alarms
Action Pak Limit Alarms AP Series
 |
The most widely used alarms in the industrial world
Accept almost any industrial input and produce a reliable single or dual contact closure
Field configurable input ranges - reduces spares requirements, very flexible
ASIC technology - increases reliability, 70% fewer connections
Plug-in modularity - low mean-time-to-repair
On-board diagnostics - local indication of signal and power status
Selectable power - 120/240AC (DC optional)
Single or dual contact closure - requires less panel space, cost effective
Size: 89mmH x 51mmW x 71mmL |
| Limit Alarms |
|
AP1080, 1090
AP1280, 1290
AP1680, 1690
G108
G118
G128
G168
Q106
Q116
Q126
Q108
|
Field Configurable, DC Input Limit Alarm
Field Configurable, T/C Input Limit Alarm
Field Configurable, AC Input Limit Alarm
Field Configurable, DC Input Limit Alarm
Field Configurable, RTD Input Limit Alarm
Field Configurable, T/C Input Limit Alarm
Field Configurable, AC Input Limit Alarm
Field Configurable, DC Input Limit Alarm, AC Powered
Field Configurable, RTD Input Limit Alarm, AC Powered
Field Configurable, T/C Input Limit Alarm, AC Powered
Field Configurable, DC Input Limit Alarm, DC Powered |
Click Here For A Quote
 |
Designed for high-density I/O applications
Narrow profile allows a density as great as 24 points per linear foot of panel space
Front mounted diagnostic LED's give visual indication of problems
Available as alarms or transmitters/signal conditioners
International housing, DIN rail mount
Efficient size - 110mm x 90mm x 18mm
Wide ranging inputs, 10mV to 200V, 1mA to 100mA, T/C, RTD, frequency, bridge
Selectable outputs, 0-5V, 0-10V, 0-1mA, 0-20mA, 4-20mA
1800 volt isolation, input/output/power
Wide ranging power supply, 9-30VDC
Designed for full agency certifications
ASIC-based
Lifetime warranty
|
| Signal Conditioners/Isolators - Temperature Input
|
AP4001, 4151
AP4351
G418
G428
Q486
Q488
|
RTD Input Signal Conditioner
Field Configurable, T/C Input Isolator
Field Configurable, RTD Input Isolator
Field Configurable, T/C Input Isolator
Field Configurable, T/C, RTD, mV Input Isolator, AC Powered
Field Configurable, T/C, RTD, mV Input Isolator, DC Powered |
Click Here For A Quote
| Signal Conditioners/Isolators - DC Input
|
AP4380-2000
AP4382
AP4390,4391,4392
G408
Q406
Q408
Q486
Q488
Q498
|
Field Configurable, DC Input Isolator
Field Configurable, DC Input Isolator, Bipolar Output
Dual Channel, DC Input Isolator
Field Configurable, DC Input Isolator
Field Configurable, DC Input Isolator, AC Powered
Field Configurable, DC Input Isolator, DC Powered
Field Configurable, T/C, RTD, mV Input Isolator, AC Powered
Field Configurable, T/C, RTD, mV Input Isolator, DC Powered
Field Configurable, DC, Frequency Input, Math Function Isolator |
Click Here For A Quote
| Signal Conditioners/Isolators - AC Input |
AP6380
G468
Q466
Q468
|
Field Configurable, AC Input Isolator
Field Configurable, AC Input Isolator
Field Configurable, AC Input Isolator, AC Powered
Field Configurable, AC Input Isolator, DC Powered |
Click Here For A Quote
| Signal Conditioners/Isolators - Bridge/Strain Input |
AP4081
G448
Q446
Q448 |
Bridge Input Isolator
Field Configurable, Bridge Input Isolator
Field Configurable, Bridge Input Isolator, AC Powered
Field Configurable, Bridge Input Isolator, DC Powered
|
Click Here For A Quote
| Signal Conditioners/Isolators - Frequency/Pulse Input
|
AP3780
G478
Q476
Q478
Q498 |
Field Configurable, Frequency Input Isolator
Field Configurable, Frequency Input Isolator
Field Configurable, Frequency Input Isolator, AC Powered
Field Configurable, Frequency Input Isolator, DC Powered
Field Configurable, DC, Frequency Input, Math Function Isolator
|
Click Here For A Quote
| Signal Conditioner/Isolators - Potentiometer Input
|
AP4003
G438
Q436
Q438 |
Potentiometer Input Signal Conditioner
Field Configurable, Potentiometer Input Isolator
Field Configurable, Potentiometer Input Isolator, AC Powered
Field Configurable, Potentiometer Input Isolator, DC Powered
|
Click Here For A Quote
| Signal Conditioners/Isolators - Special Function
|
AP4402
AP4408
AP4502
AP4570
AP4830
AP6050
AP7500
AP7501
AP7510
AP7800
Q498 |
DC Input Summing Module
DC Input Difference Module
High Input Select, Process Function Module
Track-Hold/Peak-Hold Process Function Module
Programmable Up/Down Ramp Generator
LVDT Input Signal Conditioner
DC to Frequency Converter, Square Wave Output
DC to Frequency Converter, Pulsed Relay Contact Output
Frequency Divider/Scaler
Pulse Accumulator
Field Configurable, DC, Frequency Input, Math Function Isolator
|
Click Here For A Quote
| Three-Wire Transmitters
|
Q414
Q415
Q424
Q425 |
RTD Input, Dual Channel, 3-Wire Transmitter, 4-20mA Output
RTD Input, Dual Channel, 3-Wire Transmitter, 0-10V Output
T/C Input, Dual Channel, 3-Wire Transmitter, 4-20mA Output
T/C Input, Dual Channel, 3-Wire Transmitter, 0-10V Output
|
Click Here For A Quote
| Two-Wire Transmitters/Isolators |
Q500
Q501
Q509
Q510
Q520
T700
T703
T713
T723
T752
T761
T773
T797
T798
|
1, 2, or 4 Channel, Input Loop-Powered Isolator
DC Input, 1 or 2 Channel, 2-Wire Transmitter
Multi-Channel, Isolating Current Repeater
RTD Input, 2 or 4 Channel, 2-Wire Transmitter
T/C Input, 2-Channel, 2-Wire Transmitter
Input Loop-Powered Isolator
Field Configurable, DC Input, 2-Wire Transmitter
Field Configurable, RTD Input, 2-Wire Transmitter
Field Configurable, T/C Input, 2-Wire Transmitter
Field Configurable, Potentiometer Input, 2-Wire Transmitter
Field Configurable, AC Input, 2-Wire Transmitter
Field Configurable, Frequency Input, 2-Wire Transmitter
T/C, RTD, mV Input, PC Programmable, 2-Wire Transmitter
T/C, RTD, mV Input, HART Programmable, 2-Wire Transmitter |
Click Here For A Quote
Two-Wire Transmitters
TransPak Two-Wire Transmitters T series
 |
* Rugged, die-cast aluminum housing offers protection from spurious EMI/RFI fields
* Require no extra power lines
* Two-way isolation - eliminates ground loops
* Wide ranging inputs/outputs - reduces spare inventory
* Accepts direct sensor inputs - no pre-conditioning required
* Agency approvals - can be used in intrinsically safe applications
* Loop powered device - easy connection to existing 24V loop
* Die-cast aluminum housing - strong EMI/RFI protection
* Output Span: 4-20mA, 10-50mA, selectable
* Loop Drop: 12VDC @ 20mA
* Isolation: 600VDC for models T700, T713, T723 and T752, 1000VDC for models T703 ad T773
* Temperature: -40 to 80°C (Note: model T700 is -20 to 70°C) |
T700
T703
T713
T723
T752
T761
T773
T797
T798 |
Input Loop-Powered Isolator
Field Configurable, DC Input, 2-Wire Transmitter
Field Configurable, RTD Input, 2-Wire Transmitter
Field Configurable, T/C Input, 2-Wire Transmitter
Field Configurable, Potentiometer Input, 2-Wire Transmitter
Field Configurable, AC Input, 2-Wire Transmitter
Field Configurable, Frequency Input, 2-Wire Transmitter
T/C, RTD, mV Input, PC Programmable, 2-Wire Transmitter
T/C, RTD, mV Input, HART Programmable, 2-Wire Transmitter |
Click Here For A Quote
FieldPak(TM) Two-Wire Transmitters
 |
* Eliminates ground loops
* Wide ranging input
* Field mountable/washdown protected
* Accepts direct sensor inputs
* Explosion proof housing
* Output loop powered
* Intrinsically safe operation
* Reduced noise pickup |
DC Input
The DC Input family of Signal Conditioners and Alarm Trips are manufactured in three basic formats:
Standard Plug-in modules which are factory ranged,
;MinuteManTM Plug-in & Din Pack modules which are Field Rangeable and
;Loop Powered factory ranged units.
Listed below are the transmitters and alarm units whose specification sheets are included in the DC Input section. The unit model numbers are arranged by type, function, and product format.
 |
API 1000 G
Single Alarm Trip
DC Input, Single Setpoint Alarm
API 1020 G
Dual Alarm Trip
DC Input, Dual Setpoint Alarm |
API 1005 G
Single Alarm Trip
Single Setpoint Alarm with +18VDC Loop Supply
4-20mA Input, High Alarm Configuration, Plug-in Style Case, 115VAC
API 1025 G
Dual Alarm Trip
Dual Setpoint Alarm with +18VDC Loop Supply
4-20mA Input, Hi/Lo Alarm Configuration, Plug-in Style Case, 115VAC
|
DC Input. Dual Setpoint Alarm with +18V Loop Supply
|
API 1040 G
DC Single Alarm with DC Transmitter
Contact Us to Order.
 |
API 1080 DIN
DC Input, Field Selectable, Single Setpoint Alarm, DIN Pack
API 1090 DIN
API 1090 DD
DC Input, Field Selectable, Dual Setpoint Alarm, DIN Pack |
Click Here For A Quote
API 1080 G
Single Setpoint Alarm with +18VDC Loop Supply
Field Selectable Input, Field Selectable Alarm, Plug-in Style Case, 115VAC
|
 |
Click Here For A Quote
MinuteMan, DC Input, Field Selectable, Dual Setpoint Alarm |
API 1090 G
Dual Setpoint Alarm with +18VDC Loop Supply
Field Selectable Input, Field Selectable Alarm, Plug-in Style Case, 115VAC |
API 4010 G
DC to DC Transmitter, Non Isolated
Contact Us to Order
API 4050 G
DC to DC Transmitter, Narrow Input, Non-Isolated
Contact Us to Order
API 4300 G
DC to DC Transmitter
API 4300 G EXTSUP
DC to DC Isolator Output Current Sinking
4-20mA Input, 4-20mA Output, Plug-in Style Case, 115VAC
API 4310 G
DC to DC Transmitter
Contact Us to Order
|
|
Field Selectable, DC to DC Isolator, DIN Pack |
API 4380 G
MinuteMan, Field Selectable, DC to DC Isolator
API 4380 G
DC to DC Transmitter 2000VRMS Isolation
Field Selectable Input,
Field Selectable Output, Plug-in Style Case, 115VAC
API 4380 G D
DC to DC Transmitter 2000VRMS Isolation
Field Selectable Input,
Field Selectable Output, Plug-in Style Case, 9-30VDC
API 4380 G HV
MinuteMan, Field Selectable, DC to DC Isolator,
Non-Interactive Zero/Span Adjustment, +/-100% Offset
Contact Us to Order
API 4385 G
MinuteMan, Field Selectable, DC to DC Isolator,
Non-Interactive Zero/Span Adjustment, +/-100% Offset
DC to DC Isolator Non-Interactive Controls
Field Selectable Input,
Field Selectable Output, Plug-in Style Case, 115VAC
API 4385 G A230
DC to DC Isolator Non-Interactive Controls
Field Selectable Input,
Field Selectable Output, Plug-in Style Case, 230VAC
MinuteMan, Field Selectable, DC to Frequency Transmitter, Isolated |
API 7500 G
DC to Freq. Isolator Open Collector Output
Field Selectable Input, Field Selectable Output, Plug-in Style Case, 115VAC
API 7500 G D M02
DC to Freq. Isolator TTL Output
Field Selectable Input, Field Selectable Output, Plug-in Style Case, 9-30VDC |
DPI HV-DC
Field Selectable Isolated High Voltage DC to DC Transmitter
Contact Us to Order
|
 |
DPI-2 DIN
Dual Channel Loop Powered Isolator, DIN Pack
Contact Us to Order
LP 100
Field Selectable Loop Powered Isolator
DC to DC Isolator Single Channel
Field Selectable Input,
4-20mA Output, Hockey Puk, Loop
 |
LPI-1
DC to DC Isolator Single Channel
4-20mA Input, 4-20mA Output, Plug-in Style Case, Loop
LPI-2
DC to DC Isolator Dual Channel
4-20mA Input, 4-20mA Output, Plug-in Style Case, Loop |
DC Input
Adjustable setpoint alarms
Loop powered models
Field ranging models
Isolators/converters
DIN Pack style models
Thermocouple Input
Multiple thermocouple input types
Dual setpoint alarms with 7AMP relay
Isolated or non-isolated configurations
Cold junction compensation with linearization
RTD Input
Automatic leadwire compensation
Single & dual alarms with 7AMP relay as standard
Loop-powered models
Isolated & non-isolated configurations
Frequency Input
Precision frequency to DC converter
High capacity 7AMP relay contacts
Isolation
Wide ranging transmitters
DC to Frequency Transmitters
AC Input
Functional output test pushbutton
Isolated AC to DC converter
Voltage or current output
True RMS available
5AMP input capability
Potentiometer Input
Wide range of potentiometer input values without recalibration
Voltage or current output
Optical isolation
Adjustable deadbands on alarms
Strain Gauge Input
Internal bridge excitation source
Independent setpoints on alarms
Range select with offset via rotary switches on "minuteman" units
Input & output Loop TrackerTM LED's
Drive four 350 ohm bridges
Power Supplies & Loop Powered Devices
Regulated DC voltage outputs from 5-32VDC
Two loop powered independent transmitters in a single package
Loop-powered thermocouple and RTD inputs
Current Source or current sink models available
Drivers & Math Functions
Addition & subtraction functions
Square root extraction function
Automatic or manual control modes
*Accessories
* API 008
8-Pin Socket DIN or Surface Mount
Passive, Passive, Socket, n/a
*API 011
11-Pin Socket DIN or Surface Mount
Passive, Passive, Socket, n/a
*API SUM000
Summing Assembly Board W/ Signal Trimming Pots.
Passive, Passive, Board, n/a
*API SUM025
Summing Assembly with API 4059 G W/ Signal Trimming Pots.
115VAC, Field Selectable Output, Board W/Plug-in Style Case, 115VAC
*API-CLP1
Hold Down Clip
Action Instruments Home Page
|